NIT Syllabus Raipur 3rd Semester Chemical Engineering

NIT-RAIPUR

III SEM CHEMICAL ENGINEERING SYLLABUS

 

Name of Subject

Strength of Materials Subject Code ME20312CL

 

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 70 Minimum marks 25

Lecture period works Tutorial Periods/Week Practical Periods/Week Credits

3 1 0 4

Details of Course:

 

Unit –I

 

Stress (Axial Load):

 

Normal stress, Shear stress, Factor of safety, plane stress, stress

components associated with arbitrary oriented faces in plane stress.

 

Stress-Strain Relation:

 

Hook’s Law, Poission’s ratio, strain components, strain components

associated with arbitrary sets of axes, Tensile test, elastic stress-strain relation.

 

Unit– II

 

Torsion:

 

Basic assumptions, Torsion formula, Hollow and Stepped circular shafts, Angular

Deflection.

 

Flexural Loading:

 

Theory of pure bending, Flexural formula, Shear force and Bending

moments diagram for different types of loading and support conditions on beams. Transverse

shear stress distribution in circular hollow circular, I-box and T, angle sections.

 

Unit – III

 

Deflection of Beams:

 

Strain curvature and moment curvature relation, Solution of beam

deflection problems by Direct integration method, Area moment method, super position.

 

Unit – IV

 

Principle Stresses and Strains:

 

Normal and Shear stress, concept of equivalent bending &

equivalent twisting moment, Mohr’s circle of stress and strain, Strain Rosette’s.

 

Unit – V

 

A) Columns:

 

Euler’s formula for different end conditions, Concepts of equivalent length,

Eccentric loading, Ranking formula.

 

B) Pressure Vessels:

 

Thin Presswee vessel Circumferential and longitudinal stresses in

cylindrical shell, spherical shell under internal pressure. Introduction to think

presswee vessel.

 

Suggested Text Books & References:

 

1. Ramamurtham, S., “Strength of Materials”, Dhanpat Rai & Sons, 1991.

2. Popov, E.P., “Mechanics of Materials”, Printice Hall Inc. 1984.

3. Andrew, P. and Singer, F.L. “Strength of Materials”, Happer & Row Publishers, New York,

1987.

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc2

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject

Computer Programming, in

 

C

 

++

Subject Code CL20313CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 70 Minimum marks 25

Lecture period works Tutorial Periods/Week Practical Periods/Week Credits

3 1 0 4

Details of Course:

 

Unit-I

 

Characters used in c++, Data types, Flow chart, Arithmetic operations and expressions,

Relational and logical operators, Hierarchy of operations, Standard library functions, Header

files.

 

Unit-II

 

If -else statement, For loop, While loop, Break statement, Concept of array, Multi dimensional

array, Inline function, Function , Pass by value, Pass by reference, Scope of integer and

variables.

 

Unit-III

 

Pointer, Structure, Procedure and object oriented language, Class, Object, Inheritance, Type of

inheritance

 

Unit-IV

 

Polymorphism, Run time polymorphism, Compile time polymorphism, Operator overloading,

File handling.

 

Unit-V

 

Solution of chemical engineering problems related to mass, momentum, energy transfer:

Newton- Raphoson method, Eulers method, Runga_kutta method, Simpson’s rule. Gauss

elimination method.

 

Name of Text Books:

 

1. John R. Hubberd, Programming with C

++, Schaum’s outline, Tata McGraw- Hill Publishing

Co. Ltd., New Delhi.

2. Robert Lafore, Object Oriented Programming in C++, Sams Publication.

3. Grewal B. S., Numerical Methods in Engineering and Science, Khanna Publication, New

Delhi.

 

Name of reference Books:

 

1. Venugopal K R, Rajkumar, Ravishankar, T., Mastering C

++, Tata McGraw Hill. Publishing

Co. Ltd., New Delhi.

2. Balagurusamy E, Object Oriented Programming with C

++, Tata McGraw Hill, Publishing Co.

Ltd., New Delhi.

3. Ravichandran, Programming with C++, Tata McGraw-hill Education Private Ltd., New

Delhi.

4. Numerical Recipes in C

++

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc3

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject Inorganic Process Technology Subject Code CL20314CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 70 Minimum marks 25

Lecture period works Tutorial Periods/Week Practical Periods/Week Credits

3 1 0 4

Details of Course:

 

Unit – I

 

Unit operation and Unit process concepts, Soda Ash, Common Salt, Salt Cake and

Glauber’s Salt, Chlorine and Caustic Soda.

 

Unit – II

 

Sulfur and Sulfuric Acid Industries, Industrial Gases-Acetylene, Oxygen and Nitrogen,

Carbon Dioxide, Hydrogen, Bromine.

 

Unit – III

 

Nitrogen Industries-Ammonia, Nitric Acid, Ammonium Nitrate, Phosphorous, Phosphoric

Acid, Calcium Phosphates, Ammonium Phosphates, Urea.

 

Unit – IV

 

Hydrochloric Acid, Glass Industries, Sodium silicates, Ceramic Industries, Alumina,

Aluminum, Magnesium.

 

Unit – V

 

Explosives-Types and Characteristics; Nitroglycerin and Dynamite, Nitrocellulose,

Hydrazine, Military Explosives, Portland Cements, Lime.

 

Name of Text Books:

 

1. M. Gopala Rao and Marshall Sittig: Dryden’s Outlines of Chemical Technology, III

Edition; Affliated East-West Press Pvt Ltd, New Delhi.

2. George T. Austin : Shreve’s Chemical Process Industries, McGraw Hill Book

Company.

 

Name of Reference Books:

 

1. S.D. Shukla and G.N. Pandey, Text Book of Chemical Technology Vol 1, 1977.

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc4

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject Industrial Process Calculation Subject Code CL20315CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 70 Minimum marks 25

Lecture period works Tutorial Periods/Week Practical Periods/Week Credits

3 1 0 4

Details of Course:

 

Unit – I

 

Unit and its conversion, Stoichiometric & Composition relations PVT behaviors, Gas laws,

Partial pressure and pure component volume methods. Concepts of degree of freedom.

 

Unit – II

 

Vapor-liquid equilibrium and concept of Humidity and saturation: Molal Humidity, Cox

Chart. Analysis of processes involving condensation, crystallization & vaporization,

psychometric chart, Crystallization.

 

Unit – III

 

Material Balance – Selection of a basis, conservations of mass/atom, material balance for

systems with & without chemical reactions, analysis of systems with by pass, recycle &

purge operations.

 

Unit – IV

 

Energy Balance calculations:

 

Calculation of heat of change of phase, heat of reactions, Dissolution & mixing,

combustion. Energy balance with and without chemical reaction. Combustion calculations.

 

Unit – V

 

Effect of pressure & temperature on heat of reaction. Determination of temperature for

adiabatic & non adiabatic reactions. Combined steady state material & energy balances

for Units with multiple sub-systems.

 

Name of Text Books:

 

1. Bhatt and Vora, ‘Stoichiometry’, McGraw Hill Publications.

2. Hougen and Watson, “Chemical Process Principles Part – I Material and Energy

Balance 2

nd Edition.

3. Narayanan K.V. and Lakshmikutty B. “Stoichiometry & process calculations,

Prentice hall of India.

 

Name of Reference Books:

 

1. Himmelblaue, Basic Principles and Calculations in Chemical Engineering, Pearson

Education Pvt. Ltd.

2. Ghoshal, sanyal, Dutta, Introduction to Chemical Engineering.

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc5

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject Material Technology Subject Code CL20316CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 70 Minimum marks 25

Lecture period works Tutorial Periods/Week Practical Periods/Week Credits

3 1 0 4

Details of Course:

 

Unit – I

 

Properties and behavior of materials useful in structure, machines and equipments, atomic

arrangements and imperfections elasticity, micro elasticity and phase transformation.

Theories of corrosion and corrosion and method of corrosion control.

 

Unit – II

 

Theory of alloying, constitutional diagrams, their construction and applications. Cast iron

as material of construction with reference to its application in chemical Engineering,

selection of material, general criterion of selection of material of construction in process

industries.

 

Unit – III

 

Materials of construction and their technology with reference to application in chemical

industry mild steel, high carbon steel, stainless steel, high silicon steel, molybdenum and

tungsten steel, heat treatment of plane steel.

 

Unit – IV

 

Nonferrous metals – copper, aluminum, lead, chromium, tin, brass, bronze and monel.

 

Unit – V

 

Non-metals – Glass, Enamels, graphite, wood, plastics, rubber, ebonite lining materials,

composite materials: fiber reinforced plastic composite material, concrete, asphalt and

asphalt mixture, ceramic mixture and silicates, structure and properties, polymeric material.

 

Name of Text Books:

 

1. Russel E*Gackenbach, Materials selection for process plants.

2. Frank Ramford, Chemical Engineering materials.

3. Lee Z.Z., Materials of construction for Chemical Process Industries.

 

Name of Reference Books:

 

1. Agrawal B.K., Introduction to Engineering Materials.

2. Khurmi R.S., Materials Science.

3. Gupta K.M., Material Science & Engineering.

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc6

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject Inorganic Process Lab Subject Code CL20322CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 20 Minimum marks 10

Practical Periods/Week Credits

3 2

 

Experiments to be performed (minimum 10 experiments)

 

1. Determination of percentage % purity of H

2SO4 of given acid sample

2. Determination of percentage % composition of NaOH and Na

2CO3 sample

3. Determination of percentage silica present in the given Cement sample

4. Determination of the moisture present in the cement sample

5. Determination of the combustion loss in the cement sample

6. Determination percentage %Cu present in the given Copper Sulphate sample

7. Determination of the hardness (Total & permanent)of the water sample

8. Determination of percentage of lime present in the cement sample

9. Determination of % Ca in given Dolomite sample

10. Determination of % Mn in given Pyrolusite sample.

11. Determination of % Ca in given Lime stone sample.

12. Determination of % silica in given Ash sample.

13. Determination of N in given fertilizer sample

14. Determination of P in given fertilizer sample

15. Determination of K in given fertilizer sample

16. To prepare Chrome Red in lab.

17. Estimate the percentage of available Cl

2 in sample of bleaching powder by

iodometry.

 

List of Equipments/Machines Required

 

(i) Weighing Balance

(ii) Muffle Furnace

(iii) Water Bath

(iv) Hot Air Oven

(v) Heating Mental

(vi) Silica Crucible

 

Recommended Books

 

:

1. Outlilnes of Chemical Engineering – Dryden

2. Experimental Chemistry – S.S. Dara

E:\CHEMICAL ENGG\Chemical July-2011\Syllabus Chemical Engineering_Final\All Syllabus Sem. wise PDF\NIT Syllabus B.Tech\Chemical_Sem III.doc7

 

NATIONAL INSTITUTE OF TECHNOLOGY, RAIPUR

 

CHEMICAL ENGINEERING DEPARTMENT

 

Name of Subject Computer Lab Subject Code CL20323CL

Semester B. Tech. – 3

rd Semester Board of Studies Chemical Engg.

Maximum Marks 20 Minimum marks 10

Practical Periods/Week Credits

3 2

 

List of programs:

 

1. Largest number among three numbers

2. To convert score into equivalent grade

3. To sum n numbers using while loop

4. To find sum of marks of six subject and its average for ten students using nested for

loop

5. Program using while-break statement

6. Program using break and continue statement

7. Program using goto statement

8. Program using switch-case statement

9. Program to use mathematical function

10. User defined function and main function

11. To find maximum between two number using user defined function

12. To find maximum between two number using user defined function and do while loop

13. To find maximum between three numbers using functions

14. Program using call by value method

15. Program using call by reference method

16. Passing an array to a function and returning the sum

17. Program for more than one control variables

18. To initialize the array and print the value

19. Passing the value in array

20. Find the max value in given array

21. To change base of any no

22. Program for bubble sorting

23. Program for local variable and global variable

24. Program for structure

25. Program for class

26. Program for inheritance

27. Program for polymorphism

28. Program for file handling

29. Solution of differential equations

Leave a Comment