# GTU Digital Logic Design Syllabus

GUJARAT TECHNOLOGICAL UNIVERSITY
B.E Semester: 3
Biomedical Engineering
Subject Code: 130701
Subject Name: DIGITAL LOGIC DESIGN
Sr.No Course content
1. Binary System:
Digital computer and digital systems, Binary Number, Number base
conversion Octal and Hexadecimal Number, complements, Binary Codes,
Binary Storage and register, Binary Logic, Integrated Circuit
2. Boolean Algebra and Logic Gates :
Basic Definition, Axiomatic Definition of Boolean Algebra, Basic Theorem
and Properties of Boolean Algebra, Minterms And Maxterms, Logic
Operations, Digital Logic Gates, IC digital Logic Families
3. Simplification of Boolean Functions:
Different types Map method, Product of sum Simplification, NAND or NOR
implementation, Don’t Care condition, Tabulation method
4. Combinational Logic :
Introduction, Design Procedure, adder, subtractor, Code Conversion,
Universal Gate
5. Combinational Logic With MSI AND LSI :
Introduction, Binary Parallel Adder, Decimal Adder, Magnitude Comparator,
Decoder, Multiplexer, ROM, Programmable Logic Array.
6. Sequential Logic:
Introduction, Flip-Flops, Triggering of Flip-Flops, Analysis of Clocked
Sequential Circuits, State Reduction and Assignment, Flip-Flop Excitation
Tables, Design Procedure, Design of Counters, Design with State
Equations
7. Registers Transfer Logic & Micro-Operation :
Introduction, Inter-register Transfer, Arithmetic, logic and shift Micro-
Operations, Conditional Control Statements, Fixed-Point Binary Data,
overflow, Arithmetic Shifts, Decimal Data, Floating-Point Data, Instruction
Codes, Design of Simple Computer
8. Registers, Counters and the Memory unit :
Introduction, Registers, Shift Registers, Ripple Counters, Synchronous
Counters, Timing Sequences, Memory Unit
9. Processor Logic Design :
Introduction, Processor Organization, Arithmetic Logic Unit, Design of
Arithmetic and logic circuit, Design of ALU. Status Register, Design of
shifter, Processor Unit,Design of Accumulator.
10. Control Logic Design :
Introduction, Control Organization, Hard-Wired Control, Micro-Program
Control, .
Reference Books:
1. Digital Logic and Computer Design By M Morris Mano
2. Principle of digital Electronics By Malvino & Leach
3. Modern Digital Electronics By R.P.Jain