Test Preparation on RRB JE-Mechanical Engineering Solved Paper-13
1.
A device for determining die value or magnitude of a quantity or variable
2.
Determining moisture in steam by measuring the temperature in a throttling calorimeter is an example of :
3.
The closeness with which the reading of an instrument approaches the true value of the variable being measured is called :
4.
Errors due to assignable causes are called :
5.
Pick up the appropriate word for A pointer moving over a scale :
6.
Pick up the appropriate word for A reading obtained from the motion of a pointer on a scale :
7.
Pick up the appropriate word for The reading displayed as a number, a series of holes on a punched card, or a sequence of pulses on magnetic tape :
8.
For studying detailed variations with time, one uses :
9.
The condition of how much successive readings differ from one another for a fixed value of the variable is called :
10.
The ratio of output signal or response of the instrument'" to a change in input or measured variable is called :
11.
The smallest change in measured value to which the instrument will respond is called
-
Check your progress:
 Right Ans |
 Wrong Ans |
 Not Attempted |