CSVTU, B.E. VII Semester, CIVIL Engineering Syllabus

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering Subject: Structural Engineering Design-III Code: 320711 (20)

Unit 1

Plate Girders

Bolted and Welded Plate Girders – Design of cross-section, curtailment of flange plates, stiffeners, splices.

Unit 2

Connections

Simple, Semi-rigid and Rigid Connections, Connection Configurations, Framed and seated connections,

Moment resistant connections.

Unit 3

Fabrication and Erection

Fabrication Operations, various processes for joining, forming, cutting and welding, Inspection of fabrication,

Code provisions for tolerances and deviations, Principle of erection, Erection organisation, Assembly marks,

Code provisions for erection, allowable tolerances for plumbing, levelling and alignment.

Unit 4

Industrial Buildings

Various components of an industrial building, Loads and load combinations, Design of purlins, roof trusses,

Industrial building frames, gantry girder and bracings.

Unit 5

Steel Bridges

Plate girder and Truss Bridges, General arrangement, Design loads for Highway / Railway steel bridges,

Design of Truss bridge for Railway loading.

Name of Text Books:

Design of Steel Structures – B.C. Punmia, Jain & Jain (Laxmi Publication, New Delhi)

Design of Steel Structures – A.S. Arya and J.L. Ajamani (Nemchand and Bros., Roorkee)

Name of Reference Books:

Design of Steel Structures (Vol. – I & II) – Ram Chandra (Standard Book House, New Delhi)

Design of Steel Structures – Dayaratnam (Wheeler Publishing, New Delhi)

Design of Steel Structures – E.H.Gaylord and C.N. Gaylord (Mc Graw Hill, New York)

Steel Structures: Design and Behaviour – C.G.Salmon and J.E.Johnson (Harper and Row, New York)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering Subject: Water Resources Engineering – I Code: 320712 (20)

Unit 1
Introduction

Need for Irrigation, Advantages and Disadvantages of irrigation, development of irrigation in India.

Types of Irrigation systems – Flow Irrigation, Tank Irrigation, Lift Irrigation, Tube Well Irrigation. Soil-

Water-Crop relationship, Soil groups in India.

Methods of Irrigation

Introduction, requirement of irrigation methods, surface and sub surface irrigation, sprinkler and drip

irrigation.

Water Requirement of Crops

Introduction, Water requirement of crop, quantity of water for irrigation, consumptive use of water or

evapo-transpiration, crop season and crops of India, crop period and base period, delta, duty of water,

relationship between delta duty and base period, factors affecting duty, methods of improving duty,

Intensity of irrigation, irrigation requirement of crops.

Unit 2

Canal Irrigation

Classification of canal, parts of canal irrigation system, canal alignment, lay-out of canal system,

typical canal cross section, command areas, losses in irrigation systems, water requirement of

irrigation channels.

Design of Stable Channels in Alluvium

Introduction, Kennedy’s silt theory, Garret’s diagram, Lacey’s Theory, Lacey’s regime equations,

Lacey’s shock theory, Design of channels by Kennedy’s and Lacey’s theories, Use of Lacey’s

diagrams, maintenance of Irrigation channels, sediment transport, silting of canals and its control.

Unit 3

Water Logging and its Control

Causes and ill effects of water logging, prevention and control, reclamation of water logged and saline

lands, surface drainage.

Design of Lined Channels

Introduction, benefits of lining, types of lining, economics of lining, procedure and design of lined

canals.

Distribution of canal waters

System of regulation and control, requirement of a good outlet, types of outlet.

Water Distribution System

Rotational delivery (Warabandi), Continuous delivery and delivery on demand, Role of command area

development authority, Functions and organisational structures.

Unit 4

River behaviour, Control and Training

Objects, river characteristics, river patterns, classification of river training works, methods of river

training embankments, bank protection, spurs, cutoffs, pitched island, river diversion, meandering

causes and parameters.

Flood Control

Introduction, Flood estimation, levees and embankments, channel improvement, flood ways

evacuation and flood plain zoning, economics of flood control, National Policy of floods, flood

forecasting.

Unit 5

Reservoir Planning

Introduction, Type of reservoirs, storage zones of a reservoir, mass curve and demand curve,

determination of reservoir capacity, safe field.

Flood Routing

Graphical method, trial and error method, reservoir losses, reservoir sedimentation, life of reservoir,

environmental effects of reservoirs.

Name of Text Books:

Irrigation Engineering and Hydraulic Structures – S.K. Garg (Khanna Publications)

Irrigation Engineering – B.C. Punmia (Laxmi Publications)

Name of Reference Books:

Irrigation, Water Resources and Water Power Engineering – Dr. P.N. Modi (Standard Book House)

Theory and Design of Irrigation Structures (Volume – I & II) – Varshney (Nem Chand & Bros.)

Irrigation Engineering – Asawa G.L. (New Age International Publications)

Fundamentals of Irrigation Engineering – Bharat Singh (Nem Chand & Bros.)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th Branch: Civil Engineering Subject: Environmental Engineering-II Code: 320713 (20)

 

Unit 1

Sewage and Sewarage, definitions and some common terms, object of sewage disposal.

System of sanitation: Conservancy systems, Water system, sewage system-combined,

separate and partially separate, patterns of collection system.

Amount of sewage-Estimation of domestic and storm sewage, variations in the quantity of

sewage, Design of sewers (Only circular sewer) Manholes, Pumping stations, Wet well

capacity.

Unit 2

Characteristics of sewage-physical, chemical and biological characteristics, fundamentals of

aerobic & anaerobic process.

Sewage treatment-preliminary treatment systems, Racks and screens, comminuters, Grit

chambers.

Primary treatment systems-Plain sedimentation, detention time and over-flow rates, types of

inlets and outlets, onsite wastewater treatement- septic tank, Imhoff tank, oxidation pond .

Unit 3

Secondary treatment systems-(i) Attached growth process-Trickling filters, standard and high

rates, efficiency (NRC) formula, operational problems of trickling filters (ii) Suspended growth

process, principle of suspended growth process, Activated sludge process, Oxidation ditch

aeration and mixing techniques, Operational problems of activated sludge systems,

stablisation tools aerobic, anaerobic and facultative lagoon.

Unit 4

Sewage sludge treatment-Importance, amount and characteristics of sludge, sludge

digestion, Anaerobic digestion, aerobic digestion, sludge drying beds.

Sewage disposal: disposal by dilution, self purification of polluted streams, factors affecting

self purification, Sag curve, disposal on land surfaces.

Stream standards, Effluent standards, theories of waste treatment (Volume reduction,

strength reduction, new Equalization and proportioning) Summery of Industrial waste, its

origin, character and treatment.

Unit 5

Solid waste management, source and characteristics, environmental and health implications,

refuse characteristics, collection methods, disposal of solid waste by land filling, composting

and incineration methods.

Collection and disposal of refuse, Composting of refuse.

Name of Text Books:

1. Environmental Engineering – Peavy & Rowe (Tata McGraw Hill, New Delhi).

2. Waster Water Engineering – S.K. Garg (Khanna Publication).

3. Waste Water Engineering – B.C. Punmia (Laxmi Publication, New Delhi)

Name of Reference Books:

1. Environmental Science and Engineering – Henry and Heinke (Pearson Education).

2. Waste Water Engineering – Metcalf Eddy (Tata McGraw Hill, New Delhi).

3. Introduction to Environmental Science – Y Anjaneyulu (B S Publications).

4. Environmental Science and Engineering – henry and heinke (Pearson Education).

5. Waste Water Engineering – Metcalt Eddy (Tata McGraw Hill, New Delhi)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering Subject: Quantity Survey and Cost Evaluation Code: 320714 (20)

Unit 1

General

Introduction to quantity surveying, methods of measurements and units of measurements of various

items of work, Principles of estimating, different types of estimates, procedure for computation of

stage I estimate.

General Terms

Administrative approval, technical sanction, Competent authority, Deposit works, suspence account,

imprest account, indent of stores, muster roll. Measurement book, material at site account, stock

account, establishment charges, contingencies.

Unit 2

Quantity estimate

Types, data required for estimation detailed estimates of civil engineering works. Buildings, canals,

roads steel works, water supply and sanitary works.

Unit 3

Analysis of rates

Purpose and principles factors affecting the rates of items of works, Analysis of rates of different items

such as cement concrete of different proportions, brick masonry in different mortars, flooring (tiles,

mosaic, cement concrete flooring). Use of Schedule of rates.

Specifications

Purpose and basic principles, types of specifications: brief and detailed specifications for various

items of works.

Unit 4

Contracts

General requirements of contract, types of contract, conditions, termination of contract. Brief idea

about types of tender, tender notice, earnest money, security deposit, liquidated damages, arbitration,

escalation.

Unit 5

Valuation of property

General, object of valuation, definitions of terms related to valuation, methods of determining value of

property, development method of valuation, concept of capitalized value and year purchase,

depreciation, lease, mortgage, easement.

Name of Text Books:

Estimating and Costing in Civil Engineering – B.N. Dutta (UBS Publishers, New Delhi)

Estimating and Costing and specifications – M. Chakrabarty (UBS Publishers, New

Delhi)

Name of Reference Books:

Textbook of Estimating and Costing – G.S. Birdi (Dhanpat Rai Publications)

Valuation of real properties – S.C. Rangwala (Charotar Publication)

A Textbook of Estimating and Costing – Kohli & Kohli (S. Chand & Co.)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th Branch: Civil Engineering Subject: Quality Control and Assurance in Construction Code: 320751 (20)

Unit 1

Construction Projects

Agencies involved in Construction Projects, mutual relationship, quality control at site; and whose job

is it.

Unit 2

ISO / IS Requirements

IS 9000 (Parts 1 to 4) (Pt 1; 1994, Pt 2; 1993, Pt 3; 1991, Pt 4; 1993) for Total Quality Management.

ISO 14000 – 1988 for environment – Impact of large construction projects.

Unit 3

Quality Control on Construction Projects

Inspection of reinforced concrete, masonry and steel works, testing techniques and quality at reports.

Unit 4

Statistical Analysis

Sampling frequencies, statistical and reliability analysis, optimum sample size.

Unit 5

Quality Assurance

Quality Assurance in constructions

Name of Text Books:

ISO 9000 in Construction – Nee, Paul A. (Wiley Interscience Publication, 1994)

IS: 14000, – Quality System – Guidelines for Selection and Use of Standards on Quality System

1988.

Name of Reference Books:

ISO 9000 in Construction – Wah, L.S., Min., L.C. & Ann, T.W. (McGraw Hill Book Company, 1996)

Construction Engineering and Management – S. Seetaraman (Umesh Publication)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th Branch: Civil Engineering Subject: Safety in Construction Code: 320752 (20)

 

Unit 1

Construction Project

A brief outline project definition, elements, relation to safety, types of projects and safety hazards.

Unit 2

Construction sites and safety

Tools – Electrical, Pneumatic, Grinding, Hand tools.

Machinery – Earth moving, Concrete Breaker, Carpenters, Transporting, Batching Plant and Concrete Mixer,

Dumpers.

Material Handling – Various materials and their effects, storing materials.

Common Risks and Hazards.

Unit 3

Planning Safety for Construction Projects

Safety Construction Safety, Legal Requirements, First-Aid, Safety Clauses in contract, Safety Policy, Safety

deposit, Safety Officer, Safety Committees, Safety of Contractors Worker.

Unit 4

Safety Practices

Roads and bridges, tunneling, buildings, and structures, (excavation, blasting, consent, machinery,

transportation, concrete structures, piling, deep foundations, compressed air, tunneling, dewatering, structural

steel erection, floors, and walk opening, demolition, use of ladders, electrical works, welding and cutting,

grinding and chipping, hoisting apparatus, A.C. Roofs.

Unit 5

Modern project

Special Safety practices for Modernisation Project

Planning for sequential operations and emergencies first aid, fire hazards and preventive methods.

Name of Text Books:

Construction Safety, Security and Loss Prevention – B. Fulman (———)

Name of Reference Books:

Fundamental of Construction Safety – P.T. Armstrong (————)

Construction Engineering and Management – S. Seetaram (Umesh Publication)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Fabrication and Erection of Structures Code: 320753 (20)

 

Unit 1

General

Various slopes, size and properties of rolled steel sections, tubes and hollow rectangular sections: Chemical

composition, physical properties and weldability of various types of structures steel, their suitability for various

purposes.

Planning, Estimating and costing

Scope, components of costing for fabrication and erection, Economy and cost control, various processes for

joining, forming, cutting and welding.

Fabrication Operations

Various operations like interpretation of drawings, shop-floor operations, fastenings, assembling, finishing and

shipping, sub-assemblies and main assemblies, fabrication of pipes and peristocks.

Inspection of fabrication

Code provisions for tolerances and deviations, Inspection of welds, radiographic and ultrasonic techniques.

Unit 2

Fabrication Drawings

Structural connections, their classification, symbols for their representation, layout of an industrial building,

preparation of fabrication drawing and detailing for columns, trusses, beams and cladding, detailing of trussjoints,

column bases, beam to beam and column to beam connection (Seated and framed).

Note:

 

At least three drawing sheets on above shall be prepared as class work. The examination paper shall

contain questions on above to be illustrated with sketches.

 

Unit 3

Erection (Part-I)

Principle of erection, Erection organisation, Preparation and reading of erection drawing, Assembly marks,

common types of structures to be erected, erection of tackle and false work equipments for lifting and rigging,

Code provisions for erection.

Methods of erection, levelling and alignment, setting out and grouting, allowable tolerances for plumbing,

levelling and alignment.

Tools and equipments for erection, various types of derricks, cranes and winches.

Unit 4

Erection (Part-II)

Miscellaneous small tools for erection like drifts, shakles and grips, erection of shed type buildings, portal

frames, multi-storeyed buildings, prefabricated tanks, towers and chimneys.

Unit 5

Inspection, Quality Control and Safety – Various stages of inspection, Quality control departments, prescribed

tolerances and deviations, methods of rectification of defects, Accidents and their causes, Various unsafe acts

and precautions for their prevention, Rules for safety for cranes, winches, etc. Safety during electrical

operations and while using X-ray equipments, Maintenance of erected structures, surface treatment against

corrosion, etc.

Name of Text Books:

Structural Steel Fabrication and Erection – S.K. Saxena and R.B. Asthane (Somaiya Publications, 172,

Mumbai Marathi Granth, Sangrahalaya Marg, Dadar, Bombay-14)

Name of Reference Books:

Structural Steel Drafting and Detailing – Shivagunde and Asthana (Somdiya Publications)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Construction Equipments and Techniques Code: 320754 (20)

 

Unit 1

Construction Equipments

Fundamentals of earthwork operations – Earth moving operations -Types of Earthwork Equipment-Tractors,

Motor Graders, Scrapers, Front end waders, Earth Movers.

Equipment for Dredging, Trenching, Tunnelling, Drilling, Blasting-Equipment for compaction-Erection

Equipment.

Types of pumps used in construction – Equipment for Dewatering and Grouting -Foundation and Pile Driving

Equipment.

Forklifts and Related Equipment – Portable Material Bins – Conveyors – Hauling Equipment.

Unit 2

Equipment for Production of Aggregate and Concreting

Crushers-Feeders-Screening Equipment-Handling Equipment-Batching and Mixing Equipment-Hauling,

Pouring and Pumping Equipment-Transporters.

Unit 3

Sub-structure Construction Techniques

Box jacking -Pipe Jacking-Under Water Construction of diaphragm walls and basement -Tunnelling

techniques piling techniques-driving well and caisson-sinking cofferdam-cable anchoring and grouting-driving

diaphragm walls, sheet piles-laying operations for built up offshore system-shoring for deep cutting-Large

reservoir, construction with membranes and Earth system-well points-Dewatering and stand by Plant

equipment for underground open excavation

Unit 4

Super Structure Construction

Vacuum Dewatering of concrete flooring-Concrete paving technology-Techniques of construction for

continuous concreting operation in Tall buildings of various shapes and Varying sections-Launching

Techniques-Suspended from work-erection techniques of tall structures, Large span structures-Launching

techniques for heavy decks in situ prestressing in high rise structures, aerial transporting handling erecting

light weight components on tall structures-erection of latice tower as and rigging of transmission line

structures.

Unit 5

Repair Construction

Mud jacking grout through slab foundation-micropiling for strengthening floor and shallow profile-pipeline

laying protecting sheet piles, screw anchors-sub grade water proofing under pining advanced techniques and

sequence in demolition and dismantling.

Name of Text Books:

Construction Planning, Equipment and Methods (5th Edition) – Peurifoy, R.L., Ledbetter, W.B.and

Schexnayder, C. (McGraw Hill, Singapore, 1995)

Construction Equipment and Management – Sharma S.C. (Khanna Publishers New Delhi, 1988)

Name of Reference Books:

Construction Equipment and Job Planning – Deodhar, S.V. (Khanna Publishers, New Delhi, 1988)

Construction Equipment and its Planning and Application – Dr. Mahesh Varma (Metro-politan Book Company,

New Delhi-, 1983)

Practical foundation engineering hand book – Robertwade Brown (McGraw Hill Publications, 1995)

Construction Dewatering: New Methods and Applications – Patrick Powers. J. (John Wiley and Sons, 1992)

Advanced Construction Techniques – Jerry Irvine (CA Rocketr, 1984)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Expansive Soils Code: 320755 (20)

 

Unit 1

Introduction and Identification

Expansive Soils of India, related civil engineering problems, formation of expansive soils in field, identification

of expansive solids in laboratory by X-ray diffraction method and differential thermal analysis.

Unit 2

Physical and Chemical Properties

Soil structure and clay minerology of expansive soil, atomic bond and molecular bonds, honey comb structure,

base exchanges capacity, clay water relation, electrolysis processes.

Unit 3

Foundation on Black Cotton Soil

Foundations on swelling soils, swelling potential and mechanism of volume change, chemical composition of

black cotton soil, construction techniques in black cotton soil, modern method of construction in under reamed

coil.

Unit 4

Ground Improvement Techniques

Stabilization of expansive soils with lime, slag (silica fume and aluminium sludge), cement, fly ash, chemicals,

reinforced earth technique, micro reinforced vegetation, vibro floatation, grouting and soil nailing.

Unit 5

Liquifaction Hazard Mitigation

Factors affecting the expansive soil, method of assessment for liquifaction, effect instrumentation for

monitoring, consolidation of marine clay deposits, expansive soil model of Bingham fluid bounded by porous

beds.

Name of Text Books:

Design Aids in Soil Mechanics and Foundation Engineering – S.R. Kaniraj (Tata McGraw Hill, New Delhi)

Foundation Engineering – Dr. B.J. Kasmalkar (Pune Vidyarthi Griha Prakashan, Pune)

Name of Reference Books:

Basic and applied Soil Mechanics (Revised Edition) – Gopal Rajan and Rao A.S.R. (New Age, New Delhi.

1998)

Foundation Engineering (2

nd

Edition) – Peck,R.B., Hanson (W.E. and Thornburn. W.H. Johan Wiley, New York

1976)

 

Foundation Analysis and Designing – J.E. Bowles (McGraw Hill)

 

Soil Engineering in Theory and Practice (Vol. – II) – Alam Singh (Asia Publishing House, New Delhi, 1981)

 

 

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Geotechnical Processes Code: 320756 (20)

Unit 1

Dewatering

Methods, selection, analysis and design of dewatering system.

Unit 2

Grouting

Types of grouts and their properties; Methods of grouting; Grout selection and control.

Unit 3

Compaction

Diffused double layer theory of compaction; Methods of compaction; Engineering properties of compacted

soil; Field compaction and its control.

Unit 4

Soil Stabilisation

Stabilisation using chemical additives and other methods.

Unit 5

Reinforced Earth

Concept, materials, application and design of reinforced earth wall.

Name of Text Books:

Modern Geotechnical Engineering – Alam Singh (IBT Publishers, Delhi, 1987)

Analysis and Design of Substructures – Swami Saran (Oxford and IBH, New Delhi, 1996)

Name of Reference Books:

Foundation Design and Construction (5th  Edition) – Tomlinson, M.J. (ELBS, Singapore, 1988)

Foundation Engineering (Ed.) – Leonards, G.A. (McGraw Hill, New York, 1962)

 

Geotechnical Engineering – Lee, I.K., White, W. and Ingles, O.G. (Pitman, Marshfield, Mass (U.S.A.), 1983)

 

 

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Foundation Engineering Code: 320757 (20)

 

UNIT 1

Site Investigation and Selection of Foundation

Introduction, Scope and objectives, Method of exploration boring, Sampling, disturbed and undisturbed

sampling, sampling techniques, Bore log and report, Penetration tests (SPT and SCPT), Data interpretation,

Selection of foundation based on soil condition.

Unit 2

Shallow Foundation

Introduction, Location and depth of foundation, codal provisions, bearing capacity of shallow foundation on

homogeneous deposits, bearing capacity from insitu tests, Factors influencing bearing capacity, codal

provisions, Settlement, Components of settlement, Settlement of foundations on granular and clay deposits,

Allowable and maximum differential settlements of buildings, Codal provision, Methods of minimising

settlement.

Unit 3

Footings and Rafts

Types of foundation, structural design of spread footing, Design aspects of combined and mat foundation,

Codal provisions.

Unit 4

Piles

Types of piles, Factors influencing the selection of pile, Carrying capacity in granular and cohesive soils,

Static and dynamic formulae, Capacity from insitu tests (SPT and SCPT), Piles subjected to uplift, Negative

skin friction, Group capacity, Settlement of pile groups, Interpretation of pile load test, Pile caps, Codal

provisions.

Unit 5

Retaining Walls

Earth pressure theory, Plastic equilibrium in soils, active and passive states, Rankine’s theory, Coloumb’s

wedge theory, Classical and limit equilibrium solution, Earth pressure on retaining walls of simple

configurations, pressure on the wall due to single line load alone, Graphical method (Culmann’s method

alone), Stability of retaining wall.

Name of Text Books:

Soil mechanics and foundations – Punmia, B.C. (Laxmi publications Pvt. Ltd., New Delhi, 1995)

Soil Mechanics and Foundation Engineering – Arora, K.R. (Standard publishers and distributors, New Delhi,

1997)

Name of Reference Books:

A Textbook of Geotechnical Engineering – Khan, I.H., (Prentice Hall of India, New Delhi, 1999)

Basic and applied soil mechanics – Gopal Ranjan and Rao, A.S.R. (Wiley Eastern Ltd., New Delhi (India),

1997)

Foundation Analysis and Design – Bowles J.E. (McGraw Hill, 1994)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7 th Branch: Civil Engineering

Subject: Transport Planning and Management Code: 320758 (20)

 

 

Unit 1

 

Introduction

 

 

Urbanization and transportation problems, transportation sector in five year plans, regional transportation

plans, comprehensive transportation planning, goals and objectives, principles of transport planning, process

of urban transport planning.

Unit 2

Trip Generation Analysis

Trip classification, multiple regression analysis, trip rate analysis, category analysis.

Unit 3

Trip Distribution Analysis

Methods of trip distribution, uniform factor method, average factor method, frator method, furness method,

limitations of growth factor methods, elementary gravity model.

Unit 4

Model Choice Analysis

Determinants of mode choice, theoretical framework for discrete choice model, binomial and multinomial logit

model, choice-set determination, model specification, functional form, statistical estimation, validation.

Assignment

Basic concepts, traffic assignment methods, all-or-nothing assignment, multiple route assignment, capacity

restraint assignment, diversion curves.

Unit 5

Economic Evaluation of Transport Plans

Need, costs and benefits of transport projects, methods of economic evaluation, benefit-cost ratio method,

first year rate of return, net present value methods, internal rate of return method.

Major Issues

Public transport policy, intermediate public transport, non motorized transport, transport facility for elderly

population, women and children.

Name of Text Books:

Traffic Engineering and Transport Planning – Kadiyali, L.R. (Khanna Publishers, Delhi, 1996)

Transport Planning and Traffic Engineering – Flaherty, CAO (John Wiley & Sons, Inc., New York, 1997)

Name of Reference Books:

Principles of Urban Transport Systems Planning – Hutchinson, B.G. (Scripta Book Company, Washington,

D.C., 1974)

Modelling Transport – Ortuzar, title D. and Willumson, L.G. (John Wiley & Sons, New York, 1995)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Advanced Transportation Engineering Code: 320759 (20)

 

 

Unit 1

 

Highway Economics and Financing

 

 

Benefits from highway improvement, cost of highway transportation, highway method, benefit cost ratio

method, methods of raising highway finances.

Unit 2

Highway Materials

Evaluation of subgrade soil, group index, plate bearing test, C.B.R. test Bituminous paving mixes –

Requirements, Design of mixes, Marshall Method, Modified Hubbard-Field Method.

Highway Construction

Material, Equipment, Construction procedure and quality control in construction of water bound macadam

roads, Bituminous roads and cement Concrete roads, Construction of joints in cement concrete pavements, Joint fillers

and scalers.

Unit 3

Design of flexible pavements

Design wheel loads, climatic variations, Empirical and semi-empirical methods of design, Group Index, C.B.R. Triaxial,

Mc Load Lumister’s layered system, North Dakota cone method, design of airport pavements, various design factors,

design of flexible airport pavements.

Unit 4

Design of rigid Pavements

Design considerations, wheel load stresses, temperature stresses, design of joints in cement concrete pavements, design

of rigid airport pavements.

Unit 5

Soil Stabilized road

Basic Principles of soil stabilization, various methods of soil stabilization, proportioning of materials, Mehra’s method of

soil stabilization, design of soil cement, soil lime and soil bitumen mixes, stabilization of black cotton soil and desert

sand pavement failure, evaluation and strengthening failure of flexible and rigid types of pavements, aRoad nic and

periodic maintenance, design of overlay with bankelmn beam, different types of overlays, airport pavement overlays.

Name of Text Books:

Traffic Engineering and Transport Planning – Kadiyali, L.R. (Khanna Publishers, Delhi, 1996)

Transport Planning and Traffic Engineering – Flaherty, CAO (John Wiley & Sons, Inc., New York, 1997)

Name of Reference Books:

Principles of Urban Transport Systems Planning – Hutchinson, B.G. (Scripta Book Company, Washington, D.C., 1974)

Modelling Transport – Ortuzar, title D. and Willumson, L.G. (John Wiley & Sons, New York, 1995)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Traffic Engineering Code: 320760 (20)

 

Unit 1

 

Introduction

 

 

3E’s of traffic Engineering, Special problems due to mixed traffic and other conditions in developing countries,

Concept of PCU.

Unit 2

Traffic Characteristics

Road user characteristics, Vehicular characteristics, Traffic flow characteristics, Capacity, Traffic studies,

Volume, Spot speed, Speed and delay, Origin and destination, Parking and accident.

Unit 3

Traffic Operations

Traffic regulations, Controls on vehicles, Drivers and flow, One way street tidal flow operation, priority for high

occupancy vehicles, Traffic control devices, Signs, Signals, Islands and markings, Design of isolated traffic

signals by IRC method.

Unit 4

Traffic Safety

Analysis of traffic accidents, Highway lighting, Effect of road conditions and road geometrics on traffic safety,

Traffic safety awareness.

Unit 5

Traffic and Environment

Pollution problems of cities, Noise pollution, Air pollution, Vibration, Environmental Impact Assessment,

Mitigative Measures.

Name of Text Books:

Traffic Engineering – McShane, W.R. and Roes, R.P. (Prentice Hall, New Jersey, 1990)

Traffic Engineering and Transport Planning – Kadiyali, L.R. (Khanna Publishers, Delhi, 1996)

Name of Reference Books:

Transport Planning and Traffic Engineering – Flaherty, CAO’(Ed.) (John Wiley & Sons, Inc., New York, 1997)

Traffic Flow Fundamentals – May, A.D. (Prentice Hall, Englewood Cliffs, New Jersey, 1990)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7 th Branch: Civil Engineering

Subject: Structural Engineering Drawing – I Lab Practical Code: 320721 (20)

 

Total Practical Periods: 40

 

Total Marks in End Semester Exam: 40

 

Experiments to be performed (Min 10 experiments)

 

 

1. Drawing of plan and section of various types of bolted and welded joints.

2. Detailing of a Axially Loaded angle Tension Member

3. Detailing of an Axially Loaded Compression Member with base plate.

4. Detailing of an Axially Loaded Built up Laced Compression Member.

5. Detailing of an Axially Loaded Built up Battened Compression Member.

6. Detailing of a Riveted / Bolted Plate girder.

7. Detailing of a Welded Plate girder.

8. Detailing of flexible connections

9. Detailing of Semi – Rigid Connections

10. Detailing of Rigid Connections

11. Detailing of a Industrial shed

12. Detailing of a Truss Bridge Railway Bridge.

13. Preparation of Bill of Materials

14. Preparation of Fabrication drawings.

15. Preparation of Erection drawings.

List of Equipments / Machine Required:

List of Equipments – Not Required.

Recommended Books:

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Environmental Engineering – II Lab Practical Code: 320722 (20)

 

Experiments to be performed (Min 10 experiments)

 

 

1. To determine acidity of Sewage / Industrial wastewater sample.

2. To determine Alkalinity of Sewage / Industrial wastewater sample.

3. To determine Hardness of Sewage / Industrial wastewater sample.

4. To determine Chloride Content of Sewage / Industrial wastewater sample.

5. To determine DO Content of Sewage / Industrial wastewater sample.

6. To determine Estimation of BOD of Sewage / Industrial wastewater sample.

7. To determine Optimum Coagulant Dose Test of Sewage / Industrial wastewater.

8. Determination of Total Solids in Sewage / Industrial wastewater.

9. Determination of Turbidity in Sewage / Industrial wastewater.

10. Determination of MPN in Sewage / Industrial wastewater.

11. Determination of COD in Sewage / Industrial wastewater.

12. Determination of Fluoride content in Sewage / Industrial wastewater.

13. Determination of Nitrates in Sewage / Industrial wastewater.

14. Determination of Phosphates in Sewage / Industrial wastewater.

15. Determination of Iron in Sewage / Industrial wastewater.

16. Microbiological Examination of Sewage / Industrial wastewater.

List of Equipments / Machine Required:

BOD Incubar

Turbidity meter

Microscope

pH meter

Muffle Furnace

Hot Air Oven

Jar Test Apparatus

Spectrophotometer

Name of Text Books:

Environmental Engineering Lab Manual – Dr. B. Kottaiah & N. Kumaraswamy (Charotar Publications)

Environmental Science and Engineering – Henry and Heinke (Pearson Education).

Waste Water Engineering – Metcalf Eddy (Tata McGraw Hill, New Delhi).

Introduction to Environmental Engineering and Science – Masters, G.M. (Prentice Hall of India Pvt. Ltd., 1991)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Semester: 7th  Branch: Civil Engineering

Subject: Quantity Surveying and Cost Evaluation Lab Practical Code: 320723 (20)

 

Experiments to be performed (Min 10 experiments)

 

 

1. Estimating cost of a proposed building on Plinth area method, Volume area method.

2. Estimated cost of a proposed building from materials and labour by CBRI method

3. Calculation of wall area in a building by measuring floor area for ordinary building and framed

structure.

4. Calculation of approximate cost of water supply, sanitation, electrical works for a building.

5. Preparation of approximate estimate for road projects.

6. Preparation of detailed estimate of a building.

7. Analysis of rates: Concrete work, Brick work, Plaster, Flooring

8. Use of PWD schedule of rates for determining cost of a building project.

9. Determination of present value of a building valuation.

10. Development method of valuation of plots in a locality.

11. Estimation of quantity of reinforcement and preparing bar bending schedule from a working and

drawing for a building.

12. Rate analysis using software: R.C.C. items, Masonry work, Plastering, Road work

13. Valuation by software

14. Quantity estimate by estimation software

15. Calculation of present value, anmity by software.

List of Equipments / Machine Required:

Recommended Books:

Estimating and Costing – Rangawala (Charotar Publications)

Estimating and Costing – Dutta B.N. (UBS Publishers & Distributors)

Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)

Semester: VII Branch: Common to all branches

Subject: Innovative & Entrepreneurial Skill Code: 300725 (36)

Unit I

Innovation: innovation- an abstract concept; creativity, innovation and imagination; types of innovation –

classified according to products, processes or business organizations.

Unit II

Entrepreneurship: who is an entrepreneur? Entrepreneurship- A state of Mind, Emergence of

entrepreneur; Role of Entrepreneur; A Doer not a Dreamer- Characteristics of an entrepreneur;

Factors affecting entrepreneurial growth – Social, cultural, personality factors, psychological and

Social Factors. Impact of Entrepreneurship for sustainable development.

Unit III

Difference between entrepreneur and entrepreneurship, Difference between entrepreneur and intrapreneur,

Common Entrepreneurial competencies/Traits; Entrepreneurship stimulants, Obstacles

inhibiting Entrepreneurship; Types of entrepreneurs, Functions of an entrepreneur.

Unit IV

Identification of Business Opportunities: Introduction, Sources of Business of Product Ideas, Steps in

Identification of Business opportunity and its SWOT Analysis

 

.

UNIT-V

 

Techno-Economic Feasibility of the project: Introduction, Techno- Economic feasibility of the Project,

Feasibility Report, Considerations while preparing a Feasibility Report, Proforma of Feasibility Report,

Role of Institutions and entrepreneurship.

Text and Reference Books:

1. Competing through Innovation-Bellon & Whittington, Prentice Hall of India

2. A Guide to Entrepreneurship – David Oates- JAICO Publishing House.

3. Entrepreneurship- Rober D Hisrich, Peters, Shepherd- TMH

4. Entrepreneurship in Action- Coulter, Prentice Hall of India

5. Entrepreneurship Management and Development – Ajith Kumar, HPH

6. Fundamentals of entrepreneurship- Mohanty, PHI

7.

Patterns of Entrepreneurship- Jack M Kaplan, Wiley, student Edition

.

 

Leave a Comment